Computer startup speed

When you start your computer, the computer is slow, most of the users concerned. Therefore, the common desire to speed up your computer. Summarize the process using computers, the computer starts up in a certain way, in order to speed up the sharing here.

1. the optimization settings in BIOS

The BIOS settings menu "Advanced BIOS" option, move the slider to "boot device"-Time option, and then press the button on the "top" and "Bottom", the default value is "Floppy", (d), the system reads the floppy disk drives, starting when the computer starts. Track start time and shorten your life, a floppy disk drive. So, select "drive 0. 0%, from the beginning of the hard disk drive. " In addition, you get to the BIOS settings, disable the "1MbMemoryTest" above and "QuickPowerOnSelftest".

The "Advanced chipset settings is also important to acceleration. To change the setting to "Bank 0/1 DRAM timing" a "/" or "fast" 10ns 8ns "Turbo". "Turbo" faster than the "quick", "fast but less stable," recommended.

"" "Setting is recommended for high quality memory SDRAM latency" case "2" at the beginning to ramp up.

"Many mainboards AGP support AGP, and activate the"-4XMode "."

2 DMA start, better speed, hard disk mode

UDMA/33 hard drives, technology, UDMA/66 or UDMA/100 or up to 33 MB/s transmission speed, in theory, were these disks, the speed of transmission of 66 MB/s, 100 MB/s 3-6 times than IDE disks. However, in Windows, the default settings for the DMA is disabled. If you must enable it.

Open "control panel → system → management tools" window "direction"-DJ drive, double-click the hard disk drive is UDMA, tick "settings → properties → settings" "ö" entry "DMA," go, and then click OK. "." Close all dialog boxes, and then restart the computer.

3 remove the Windows Startup logo.

First, the "start" → "settings" → "folder options" window. The "Advanced settings" labels "with regard to", select "show all files". Open the c drive, you will find this MSDOS "." and "the read-only attribute can be set aside". Open, and a statement: logo "phase 0" Option = "statement and: LOGO = 0" and then the Windows Startup logo will not load, it reduces the startup time for several seconds.

"The 4 elements" "start optimizer."

Beginners to try some computer software programs like, but deleted after a certain time. For reasons unknown, the software is always to start, which significantly increases the startup time. -Easy to solve this problem. "Start" → "Run" and type in order to increase the "Msconfig" command programs "system configuration utility", click the "start" tab and "ö" delete all programs, it can not be downloaded. At least you can boot in 10 seconds.